Wallpaper calculator
Work out how many double rolls of wallpaper you need, in inches and feet.
How many double rolls of wallpaper do you need?
Enter your wall measurements in inches and choose the roll size. Every roll we sell counts as one American double roll; you'll find its width, length and pattern repeat on the product page.
Includes a 2-inch trim allowance per strip.
Order all rolls at once: a later production run can differ slightly in color.
Shop wallpaper by the roll
Our wallpaper calculator tells you in seconds how many double rolls you need for your wall. Enter the width and height in inches and choose the roll size. On every wallpaper product page, the calculator already knows the exact roll size and pattern repeat of that design. It accounts for:
- a 2-inch trim allowance per strip;
- the pattern repeat, so every strip lines up with the next one;
- a half-drop match, when the design has one.
European rolls and American double rolls
Every roll we sell counts as one American double roll. A standard European roll is about 20.5 to 21 inches wide and 33 feet long and covers roughly 56 square feet; the wider 27-inch rolls cover about 75 square feet. Prices and quantities on our US site are always per roll, so the number the calculator gives you is the number you order. Our guide European Rolls vs. Double Rolls converts every common roll size into inches and square feet.
How to calculate how many double rolls of wallpaper you need
- Number of strips = (wall width + 2 in) ÷ roll width, rounded up.
- Length per strip = wall height + 2 in, rounded up to a whole number of pattern repeats.
- Strips per roll = roll length ÷ length per strip, rounded down.
- Number of rolls = number of strips ÷ strips per roll, rounded up.
Example. A wall 13 feet wide and 8 feet high (156 × 96 inches), with a roll of 20.9 inches by 33 feet. You need 8 strips (158 ÷ 20.9 = 7.6). Without a pattern, each strip is about 98 inches, so you get 4 strips from a roll and need 2 double rolls. With a 25-inch pattern repeat, each strip becomes about 101 inches (4 × 25.2 in). You then get 3 strips from a roll and need 3 double rolls. The repeat often makes the difference.
Good to know: the calculator does not subtract windows, doors or sloped ceilings. The result is an estimate and not binding.
Measuring tips for American homes
Measure each wall at its widest point, and its height from the top of the baseboard to the ceiling or the underside of the crown molding. In a room with a vaulted ceiling or a stairwell, measure the tallest point: that decides the strip length. Before you order, a wallpaper sample shows how the color and texture look in your own light.
Tip from our specialists
Not sure about the numbers or the direction of the pattern? Email us your wall measurements in inches or feet and we will check the calculation for you.
How many double rolls of wallpaper do I need?
That depends on your wall size, the roll size and the pattern repeat. Divide the wall width plus 2 inches by the roll width to get the number of strips, work out how many strips fit on one roll (roll length divided by the strip length, including the repeat) and divide the strips by the strips per roll. Every roll we sell is one American double roll, so that result is the number you order. On each product page, the calculator does this automatically with the exact dimensions of that wallpaper.
What is a pattern repeat, and why does it mean I need more wallpaper?
The repeat is the vertical distance after which the design starts again, listed on the product page. Each strip has to line up with the one next to it, so the strip length is rounded up to a whole number of repeats. With a large repeat, more paper is left over per strip and you get fewer strips from each roll.
What is a half-drop match?
With a half-drop match, the design shifts down by half a repeat from one strip to the next. Every other strip therefore starts at a different point in the pattern, which often takes a little more wallpaper. Our calculator includes this automatically when the wallpaper has a half-drop match.
Should I subtract windows and doors from my measurements?
For standard windows and doors, it is better not to: a lot of paper is lost cutting around the trim. The calculator deliberately leaves them in. For a large picture window, a sliding glass door or an open archway, you can subtract that width from the wall width.
Should I order an extra double roll?
With a large repeat or a lot of cutting, an extra roll is a smart choice. Wallpaper is printed in production runs, and a later run can differ slightly in color. Order all rolls at once and keep a leftover roll for repairs.
How do I measure for made-to-measure wallpaper, murals or panels?
Made-to-measure wallpaper and murals are ordered per square meter or as panels cut to your wall. Measure the width and height of the wall from baseboard to ceiling in inches, without a margin, and enter them on the product page: the calculator converts them and works out the area or the number of panels. Not sure? Email us your measurements.
Measuring in inches?
On our US site, the wallpaper calculator on every product page works in inches by default. Wondering how European rolls compare to American double rolls? Our guide translates roll sizes into inches and square feet: European Rolls vs. Double Rolls: Sizes in Inches.






























